Vivotek Network Camera FD7141(V) Manual de usuario descargar pdf (Pagina 12)

EN - 11

English

Based on the live image retrieved from the camera, adjust the camera lens by doing the

following:

DO NOT over tighten the controllers.

Doing so will damage the camera

lens module.

To adjust the viewing angle

1. Loosen the pan screw and then turn the lens module left and right. Upon completion,

tighten the pan screw.

2. Loosen the tilt screws on both sides of the camera and turn the lens module up and

down. Upon completion, tighten the tilt screws.

3. Loosen the image adjustment screw and then turn the lens to adjust the image

orientation. Upon completion, tighten the image adjustment screw.

To adjust the zoom factor and focus range

1. Loosen the zoom controller, then adjust zoom factor by moving the controller left and

right. Upon completion, tighten the zoom controller.

2. Loosen the focus controller, then adjust focus range by moving the controller left and

right. Upon completion, tighten the focus controller.

Loosen

Tighten

Loosen

Tighten

Loosen

Tighten

Loosen

Tighten

Rotate the screw

Turn the lens

Adjusting the Lens

Pan 350°

Tilt 95°

Rotate 350°

1 2 ... 7 8 9 10 11 12 13 14

Sin comentarios

Vivotek Network Camera FD7141(V) Manual de usuario Pagina 12