Vivotek VIVOTEK IP8352, Network Camera, Supreme Series, with 1.3 Megapixel, with Focus Assist and WDR Enhanc Manual de usuario Pagina 99

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 98
VIVOTEK
User's Manual - 99
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the dened threshold.
If you want to congure specic motion detection settings individually for day/night/schedule operations,
please click Prole to open the Motion Detection Prole Settings page as shown below. A total of three
motion detection windows can be congured on this page as well.
Please follow the steps beolw to set up a prole:
1� Create a new motion detection window
2� Check Enable this prole
3� Select the applicable mode: Day mode, Night mode, or Schedule mode Please manually enter a time
range if you prefer the Schedule mode�
4� Click Save to enable the settings and click Close to exit the page�
This motion detection window will also be displayed on the Event settings page You can go to Event >
Event settings > Trigger to choose it as a trigger source� Please refer to page 86 for detailed information�
Percentage = 30%
2011/03/21 17:08:56
Vista de pagina 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 181 182

Comentarios a estos manuales

Sin comentarios