Vivotek VIVOTEK IP8352, Network Camera, Supreme Series, with 1.3 Megapixel, with Focus Assist and WDR Enhanc Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
VIVOTEK
User's Manual - 49
Security > IEEE 802.1x
Advanced Mode
Enable this function if your network environment uses IEEE 8021x, which is a port-based network
access control The network devices, intermediary switch/access point/hub, and RADIUS server must
support and enable 802�1x settings�
The 8021x standard is designed to enhance the security of local area networks, which provides
authentication to network devices (clients) attached to a network port (wired or wireless). If all certicates
between client and server are veried, a point-to-point connection will be enabled; if authentication fails,
access on that port will be prohibited 8021x utilizes an existing protocol, the Extensible Authentication
Protocol (EAP), to facilitate communication�
The components of a protected network with 802�1x authentication:
1�
Supplicant: A client end user (camera), which requests authentication�
2�
Authenticator (an access point or a switch): A “go between” which restricts unauthorized end users
from communicating with the authentication server
3�
Authentication server (usually a RADIUS server): Checks the client certicate and decides whether to
accept the end user’s access request�
VIVOTEK Network Cameras support two types of EAP methods to perform authentication: EAP-PEAP
and EAP-TLS
Please follow the steps below to enable 802�1x settings:
1� Before connecting the Network Camera to the protected network with 8021x, please apply a digital
certicate from a Certicate Authority (i.e., MIS of your company) which can be validated by a RADIUS
server
2 Connect the Network Camera to a PC or notebook outside of the protected LAN Open the
conguration page of the Network Camera as shown below. Select EAP-PEAP or EAP-TLS as the
EAP method In the following blanks, enter your ID and password issued by the CA, then upload
related certicate(s).
Supplicant
(Network Camera)
Authenticator
(Network Switch)
Authentication Server
(RADIUS Server)
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 181 182

Comentarios a estos manuales

Sin comentarios