Vivotek PT8133W Guía de instalación descargar pdf (Pagina 13)

EN - 12

NOTE:

1. WPS may not work if your AP is congured with a "hidden" SSID.

2. If the camera can not detect an AP after 2 minutes, the wireless setup will be

cancelled.

3. If a camera is assigned with a xed IP outside the AP's network segment, wireless

setup will fail.

4. A wired connection always has a higher priority. Unplug the LAN cable at an

appropriate time for the wireless setup to take effect.

5. The camera also supports manual conguration of wireless settings, enter the

SSID (Service Set Identier) and security authentication password in a web

console with the camera.

5-1. Enter the Conguration page -> Wireless.

5-2. Enter the SSID and password of your AP, select the Wireless mode as

"Infrastructure."

5-3. Use the "ping <IP address> -t" command in a DOS prompt to observe wired

connectivity. Click the Save button. When wired connection is discontinued,

unplug the LAN cable.

5-4. After several seconds, the camera will switch to wireless connection.

Disconnect and then connect the power cord to restart the camera, and you

should be able to see live video from the web console.

6. Select "Ad-Hoc" wireless mode if you prefer direct connection with a PC without the

intermediate AP or wireless router.

1 2 ... 8 9 10 11 12 13 14

Sin comentarios

Vivotek PT8133W Guía de instalación Pagina 13