Vivotek PD8136 Manual de usuario descargar pdf (Pagina 2)

2 of 7

INSTALLATION OVERVIEW

Installing the Vivotek camera can be broken down into the following steps:

1. Install cameras at desired locations, and pull power and Cat5 cabling as needed. Refer to the

Vivotek documentation for mounting details.

2. Connect the cameras electrically to the home network and configure the cameras. See Camera

Configuration.

3. Integrate the cameras into the g! system and test proper operation. This step is outlined in g!

Configuration Details.

CAMERA CONFIGURATION

Note: The Vivotek web Interface for your particular model of camera may vary somewhat from the

example screenshots below.

1. Connect the Video Camera to the network.

2. Use the Vivotek Installation Wizard or g!Tools Network Manager to locate the device on the

network. See Vivotek documentation for details on using the Installation Wizard as a network

finder.

3. Start a browser and bring up the video camera interface by typing in the IP Address- you should

see a screen similar to the one below.

4. Click the Configuration link

at the left to open the device settings.

1 2 3 4 5 6 7

Sin comentarios

Vivotek PD8136 Manual de usuario Pagina 2