Vivotek PT3113 Guía de instalación
Busca en linea o descarga Guía de instalación para Cámaras De Seguridad Vivotek PT3113. Vivotek PT3113 Installation guide Manual de usuario
- Pagina / 66
- Tabla de contenidos
- MARCADORES
- Before You Use This Product 2
- Table of Contents 3
- Package Contents 6
- Installation 7
- To install in wireless LAN 8
- Software Installation 9
- Check Network Settings 12
- How to Use 13
- Installing Plug-in 14
- Primary User’s Capabilities 15
- The Configuration: 16
- The camera view: 16
- Client Settings 17
- Administrator’s Capabilities 19
- Only Quality Images Will Do 20
- Software Revision Upgrade 30
- Definitions in Configuration 31
- System Parameters 32
- User Group Administration 33
- Network Settings 34
- Streaming 35
- WLAN Configuration 35
- Mail & FTP 37
- Video Codec Parameters 39
- Motion Detection 41
- Application Setup 42
- Sequential Operation 43
- Camera Control 44
- Preset Function Area 45
- UPnP and DDNS Settings 46
- Remote Controller 47
- Viewing System Log 48
- Viewing System Parameters 48
- Factory Default 48
- Appendix 49
- Drive the Digital Output 53
- Restart System 54
- Page URL 55
- System Resource URL 55
- System Configuration URL 56
- Security Configuration URL 57
- Network Configuration URL 57
- Camera Control URL 62
- D. Technical Specifications 65
- Liability 66
Indice de contenidos
- 9 - Upon IP installer’s start up, a searching box will pop up. This program searches for 4XEM ’s product on the same LAN: Aft
- 10 - The 4XEM ’s new uPnP function will always assign an IP address for the Network Camera. The Administrator can click on butt
- 11 - Initial Access to the Network Camera Check Network Settings The Network Camera can be connected either before or immediately
- 12 - How to Use Authentication After opening the Web browser and typing in the URL of the Network Camera, a dialogue window pops up
- 13 - Installing Plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to insta
- 14 - Primary User’s Capabilities Main Screen with Camera View The main page layout has three parts: Configuration functions: The c
- 15 - The Configuration: “Digital Output” Clicking on the “On” or “Off” button turns the digital output to either on or off status
- 16 - Client Settings At the initial access to the “Connection type” page in Windows, the web browser will ask for a new plug-in ins
- 17 - The TCP protocol allows for less packet loss and produce a more accurate video display. The downside with this protocol is tha
- 18 - Administrator’s Capabilities Fine-tuning for Best Performance There are a few choices the Administrator is allowed to maximize
- 1 - Before You Use This Product The use of surveillance devices may be prohibited by law in your country. The Network Camera is not
- 19 - system and 30 fps in a 60Hz system. If your network bandwidth is more than 384Kbps, you can fix the bit rate according to your
- 20 - Opening Accounts for New Users Protect Network Camera by passwords Network Camera is shipped without any password by default.
- 21 - option to access DI/DO is provided for each account. Some users may need to prohibit from controlling your attached devices. A
- 22 - 3. Go to the bottom of the page and check off on “Allow more viewers with snapshot mode”, 4. Set the snapshot interval to refr
- 23 - 5. Click on “Application” in the left column, 6. Select the day or days of the week in “Weekly schedule” you want to upload t
- 24 - according to your Network Camera. Define the refresh interval according to your network bandwidth for best result. If th
- 25 - <html> <p align=left> <font size="7" face="Comic Sans MS" color="#FF0000">
- 26 - Building a Security Application The Administrator can combine options on the application page to perform many useful security
- 27 - 4. Check the “Event operation”. The triggering condition can be set to detected motion or status of the attached device, 5. Se
- 28 - 11. Use the mouse to click, hold, and drag the window corner to resize or the title bar to move, 12. Fine-tune using the “Sens
- 2 - Table of Contents Before You Use This Product 1 Package Contents 5 Installation 6 Hardware Installation 6 Software Instal
- 29 - Software Revision Upgrade Customers can obtain the up-to-date software from the web site of 4XEM . An easy-to-use Upgrade Wiza
- 30 - Definitions in Configuration Only the Administrator can access system configuration. Each category in the left column will be
- 31 - System Parameters "Host name" The text displays the title at the top of the main page. “Turn off the LED indicator
- 32 - User Group Administration “Root password” Change the Administrator’s password by typing in the new password identically in bot
- 33 - Network Settings Any changes made on this page will restart the system in order to validate the changes. Make sure every field
- 34 - address is 192.168.0.100 from 80 to 8080, the User must type in the web browser “http://192.168.0.100:8080” instead of “http:/
- 35 - “TX rate” This field is for selecting the maximum transmission rate on the network. The default setting is “auto”, that is the
- 36 - Mail & FTP SMTP “SMTP (mail) server 1” The domain name or IP address of the external email server. “Recipient email addres
- 37 - slash symbol before the path without virtual path mapping. Refer to the instructions for the external FTP server for details.
- 38 - Video Codec Parameters “Text on video” The text will be displayed in the black bar above the video window with a timestamp. Th
- 3 - FTP 36 Video Codec Parameters 38 Motion Detection 39 Motion Detection 40 Application Setup 41 Weekly Schedule 41 Event Op
- 40 - Motion Detection “Enable motion detection” Check this option to turn on motion detection. Click on this button to add a new
- 41 - Application Setup Weekly Schedule “Sun” ~ “Sat” Select the days of the week to perform the following operations. “Snapshots be
- 42 - stand for the snapshots, before event, right upon event, and after event. The date and time suffix may also be added as an opt
- 43 - Camera Control On the Camera Control page, there are two main function control areas: Camera Control Area The pan and tilt fu
- 44 - “Auto pan/patrol speed” This defines the speed of panning and patrol, the greater the value, the faster the speed. Preset F
- 45 - UPnP and DDNS Settings “Enable DDNS” This option turns on the DDNS function. “Provider” The provider list contains four hosts
- 46 - Remote Controller Models PT3113 and PT3123 both provide a remote controller to command the camera’s pan/tilt and other functio
- 47 - Viewing System Log Click on the link on the configuration page to view the system log file. The content of this file provides
- 48 - Appendix A. Troubleshooting Status LED After powering up, the Network Camera performs a self-diagnostic to detect any hardware
- 4 - Application Configuration URL 59 D. Technical Specifications 61
- 46 - B. Frequently Asked Questions Q What if I forget my password? A After the Administrator's password has been assigne
- 47 - Q Can I install it on ceiling? A Yes. There are flip and mirror options in the video configuration page to correct the images
- 48 - Q How fast is the video rate of the Network Camera? A The MPEG4 codec engine can process up to 30 frames per second internally
- 49 - C. URL Commands of the Network Camera For some customers who already have their own web site or web control application, the N
- 50 - Restart System /setup/reset.cgi Restart the Network Camera without warning.
- 51 - Page URL The configuration page has a frame layout including an option list frame and an option page frame. Referenced URLs, e
- 52 - General Format of Command URL Every configuration can be set through URL with the POST method by the Administrator only. &
- 53 - Security Configuration URL URL: /setup/security.cgi NAME VALUE DESCRIPTION rootpass <text string shorter than 15 charact
- 54 - cport <number less than 65535> control Channel port vport <number less than 65535> video Channel port aport
- 55 - netkey2 hexadecimal string (00 ~ FF) network key 2 netkey3 hexadecimal string (00 ~ FF) network key 3 netkey4 hexadecimal
- 5 - Package ContentsIPCAMWLPT Power adapter A/V Cable Remote Controller Camera stand Antennas Software CD Quick ins
- 56 - mailto1 <string shorter than 80 characters> mail recipient address smtp2 <domain name or IP address> secondar
- 57 - 3 normal B/W monochrome color <other than B/W> color fixb fix bit rate quality <other than fixb> fix quanti
- 58 - improve anthing to improve audio quality in low bandwidth environment, this option must be resent whenever the URL is called
- 59 - NAME VALUE DESCRIPTION brightness <-5 ~ 5> adjust brightness of image contrast <-5 ~ 5> adjust contrast of im
- 60 - ioupload < not required > upload snapshot when DI condition matched mdupload < not required > upload snapshot whe
- 61 - D. Technical Specifications - System CPU: Trimedia PNX1300 RAM: 16MB SDRAM ROM: 2MB FLASH ROM - Networking Protocol TCP/IP
Electromagnetic Compatibility (EMC) This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. l This device
- 6 - Installation Hardware Installation Please verify that your product package contains all the accessories listed in the foregoin
- 7 - self-test, go to next paragraph “Software installation”. If the Ethernet is not available, Network Camera will switch to wirele
- 8 - Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administra
Relacionado con productos y manuales para Cámaras De Seguridad Vivotek PT3113
(91 paginas)
(2 paginas)
(14 paginas)
(146 paginas)
(213 paginas)
(2 paginas) (207 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.079 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales