Vivotek CC8130 Guía de instalación descargar pdf (Pagina 4)

EN - 3

English

Round cable

Flat cable

4. Hardware Installation

Connecting Ethernet Cable

1. Insert your Ethernet cable through the

opening at the bottom of the camera

bracket.

2. If using a round cable: When the RJ-45

plug is fully inserted, use the round-

head screw with a washer to secure its

position from the bottom of the bracket.

If using a flat cable: Pass the cable

through the opening and attach to

camera.

Strain relief boot

Record the MAC address before installing the

camera.

It is recommended to use an Ethernet cable that

comes without the strain relief boot. You can remove

the boot if your cable comes with one.

To detach a camera, remove the retention screw

from the bottom, and insert a straightened paperclip

into the release button to press on the RJ-45 locking

tab.

IMPORTANT:

NOTE:

1 2 3 4 5 6 7 8

Sin comentarios

Vivotek CC8130 Guía de instalación Pagina 4