Vivotek SD83xxE/-M Guía de instalación descargar pdf (Pagina 4)

EN-3

English

Hardware Installation

3

HD WDR Pro

IMPORTANT:

If your camera comes without the dehumidier,

you should examine whether the color of the

silica gel inside the chassis has turned red. If

so, you should replace the desiccant bag.

To replace the desiccant bags:

1. Remove the dome cover by loosening 4 T25

anti-tamper screws.

2. Replace the desiccant bags by attaching

them rmly to the inside of the chassis.

3. Re-install the dome cover.

Also note the following:

1. Do not install the camera in a raining day.

2. It takes approximately 2 days to suppress

the moisture level to 30% or lower, either

using the desiccant bags or the dehumidier.

3. Condensation may still be observed from on

the dome cover within 30 minutes.

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios