Vivotek MD8562D Manual de usuario descargar pdf (Pagina 11)

EN - 10

Attach the dome cover to camera. Secure

the dome screws with the supplied

screwdriver. Finally, make sure all parts of

the camera are securely installed.

Completion

Fine-tune the Camera Focus

The focus of this network camera is set from 1.0 meter to innity by factory default. If you want to

focus on objects closer than 1.0m or the lens has lost focus, please ne tune it in the following way.

Loosen the lens lock screw.

1. Loosen the lens lock screw under the lens

module.

2. Manually rotate the lens to ne-tune the focus

until the live image is clear.

3. Tighten the lens lock screw.

Tear down the aluminum foil vacuum bag and

take out the moisture absorber. Attach the

supplied moisture absorber to the inner side of

the dome cover. (Please replace the absorber

whenever you open the dome cover.)

IMPORTANT!

Please secure the screws

tightly to avoid moisture.

1 2 ... 6 7 8 9 10 11 12

Sin comentarios

Vivotek MD8562D Manual de usuario Pagina 11