Vivotek IP7161 Especificaciones descargar pdf (Pagina 55)

VIVOTEK

User's Manual - 55

■ Auto

The Network Camera automatically adjusts the color temperature of the light in response to different light

sources� The white balance setting defaults to Auto and works well in most situations�

■ Keep current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting

conditions�

1� Set the White balance to Auto and click Save�

2� Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color

temperature automatically�

3. Select Keep Current Value to conrm the setting while the white balance is being measured.

4� Click Save to enable the new setting�

Image Adjustment

■ Brightness: Adjust the image brightness level, which ranges from -5 to +5. The default value is set to -5.

■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.

■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.

■ Sharpness:

Adjust the image sharpness level, which ranges from -5 to +5� The default value is set to 0�

Enable Edge Enhancement

Edge enhancement is an image processing lter that enhances the edge contrast of an image or video to

improve its sharpness� Enter a value from 1 to 128 to set the degree of enhancement desired�

Enable Noise Reduction

Noise reduction is the process of removing noise from a signal� Select the type of noise to remove and

enter a value from 1 to 63 to set the degree of enhancement required�

You can click Preview to fine-tune the image, or click Restore to recall the original settings without

incorporating the changes� When completed with the settings on this page, click Save to enable the

setting and click Close to exit the page�

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 163 164

Sin comentarios

Vivotek IP7161 Especificaciones Pagina 55