Vivotek IP Surveillance Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 183
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
VIVOTEK - Built with Reliability
User's Manual - 15
4. The system will automatically create volumes from the installed disk drives. The process will
take several minutes.
5. When done, the LiveClient screen will display, and, by default, the recording from the
selected cameras will immediately take place.
Initial Conguration - via a Web Console (Optional)
5
2. From a management computer, install the IW2 utility software included in the product CD.
Follow the onscreen instructions to complete the installation.
1. Press the power switch on the front panel to start the NVR. Wait for the system status LED to
light green.
If you already congured the system using an Ethernet web console, please skip the Auto Setup
steps when you connect the HDMI cable. You may accidentally format your storage volumes.
IMPORTANT:
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 182 183

Comentarios a estos manuales

Sin comentarios